L350/L350D

 

 

 

 

 

 

 

Settings

Chooses from the : Options tab to change the

 

 

tool position; the Picture tab to select picture

 

 

output options such as size, export file and

 

 

saving location; the Video tab to choose output

 

 

settings such as Frame Rate, Size, Compression

 

 

and the file save path; the Audio Device,

 

 

Compression,Volume and file save path.

 

 

 

 

Help

Displays the help files for the software.

 

 

 

Using the microphone

Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.(Built-in microphone is provided with some models)

Since your computer has a built-in microphone and speaker, “feedback” may be heard under certain conditions. Feedback occurs when sound from the speaker is picked up in the microphone and amplified back to the speaker, which amplifies it again to the microphone.

This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is a common phenomenon that occurs in any sound system when the microphone input is output to the speaker (throughput) and the speaker volume is too loud or too close to the microphone. You can control throughput by adjusting the volume of your speaker or through the Mute function in the Master Volume panel. Refer to your Windows documentation for details on using the Master Volume panel.

Modem

The availability of this feature is depending on the model you purchased. This section describes how to connect and disconnect the internal modem to and from a telephone jack.

The internal modem does not support voice functions. All data and fax functions are supported.

■In case of a lightning storm, unplug the modem cable from the telephone jack

■Do not connect the modem to a digital telephone line. A digital line will damage the modem.

Region selection

Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.

User’s Manual

4-27