Configuring, Modifying, and Monitoring the Unit
17
You can configure, modify, and monitor the unit using the following categories of commands:
• Console
• System
• IP configuration
• SNMP Agent
• Switching database and database entry management
• Virtual LAN
• EtherChannel
• Port Configuration
• Switching Statistics
• Spanning Tree
Refer to Appendix A for a quick reference of the available commands.

Console Commands

Console commands allow you to configure the CLI parameters and user interface. To view the
console commands, enter console at the CLI prompt. The following are the available
console commands.
help-kbd
This command lists the console function keys.
Example
SYS_console>help-kbd
---------------------------------------------------------
Ctrl/U (or Escape) clears the current line.
Ctrl/W clears the previous word.
! or Ctrl/P presents the previous command.
TAB completes command.
? or help presents help. Depending on position:
in 1st column, list of the categories.
in command, list of completed commands that start with the presented
string.
in parameters, lists of the parameters.
# - with line number Repeats command from history,
For example: #26 Presents help for line 26.
Without line number Shows entire history list.
--------------------------------------------------------