Configuring, Modifying, and Monitoring the Unit
55
Setting the Monitoring Portset-mon-port
set-mon-port <port>
Example
SYS_telnet>set-mon-port 1
Set of the Monitor Port - OK
Monitoring with: monitorTo set the port to be monitored and start the monitoring process decimal port. All traffic from
this port is duplicated on the monitoring port specified by the set-mon-port command.
monitor <dport>
Example
SYS_telnet>monitor 1
Start monitoring port 1 - OK
The monitoring device must be connected to the monitoring port before monitoring is activated.
Saving the Configurationsave-mon
The save-mon command saves the current port-monitoring configuration to the NVRAM.
Example
SYS_telnet>save-mon
Save monitoring configuration to NVRAM - OK
Stopping Monitoringstop-mon
Example
SYS_telnet>stop-mon
Stop monitoring - OK