Configuring, Modifying, and Monitoring the Unit
49
NOTE: You must issue the new-srvr-port command before the new-vlan commands for
those VLANs to which it will be made available.
new-srvr-port Set a Vlan Server port(s)
[arg #0] database type - either {run|nvram|all}
[arg #1] server ports - ports list in format: d1-...-dn
[arg #2] VLAN Tag { 2..4095 }
opt.[arg #3] VLAN priority 1..8 (1..4 - low, 5..8 - high); default : 1

Removing a Server Port

del-srvr-port
The del-srvr-port command deletes a defined server port.
del-srvr-port <database><port-list>
[arg#0] database type – either {runnvram}
[arg#1] server ports – ports list in format: <dport>
VLAN

Creating a VLAN

new-vlan
The new-vlan command creates a new VLAN (
tag
based).
new-vlan Make a new VLAN
[arg #0] database type - either {run|nvram|all}
[arg #1] Name of new vlan
[arg #2] VLAN Domain - ports list in format: d1-...-dn
[arg #3] VLAN Tag { 2..4095 }
opt.[arg #4] VLAN priority 1..8 (1..4 - low, 5..8 - high); default : 1
Example
SYS_console>new-vlan all v1 9-10-11-12 10
Set run Port VLAN Domain entry – OK
SYS_console>
NOTE: If you plan to define a server port, then you must configure that before you define
the VLANs.

Viewing VLAN Configuration

get-vlan-tbl
Get-vlan-tbl {runnvram}