The Ethernet port, also referred to as the QMS CrownNet network
interface, is a combination of hardware and host software that allows
your QMS 1725E printer to be connected to an Ethernet network t hat
supports the following:
Connecting to the Ethernet port consists of four steps:
Connecting to the network
Installing the software
Configuring the interface
Configuring the network
The rest of this chapter explains these steps in more detail.
The Ethernet port supports two types of connections:
Thin-wire Ethernet (10Base2, BNC connector)
Twisted-pair Ethernet (10BaseT, RJ45 connector)
Operating System Protocol
AppleTalk EtherTalk
LAN Manager/LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX
TCP/IP TCP/IP