3 Open an OS/2 window, and at the C> prompt, change to the
drive in which you inserted the CrownNet Manager disk (for
example, a:↵).
4 At the drive prompt type
lsminst
x
:
y
:↵
where
x
is the drive in which you inserted the CrownNet
Manager disk, and
y
is the drive on which CrownNet
Manager will be installed (for example, lsminst a: c:↵).
lsminst
x
:
y
: /u↵
.
The installation program creates and installs the software in
a directory named
y
:\CROWN.
.
5 Remove the disk from the disk drive and store it in a safe
place.
6 To start the CrownNet Manager for OS/2 automatically each
time the print server is turned on, add the following com-
mands, in this order, at the end of the STARTUP.CMD file (but
before any @EXIT command):
set crownman=c:\crown
start c:\crown\crownman.exe -m
.
7 To start the CrownNet Manager now, open an OS/2 window
and type the following command s:
set crownman=c:\crown↵
start c:\crown\crownman.exe↵
The CrownNet Manager window appears.
8 To install specific ports, choose Install from the CrownNet
Manager window.