and thus availability. To do this, the HPSS administrator will need to:
•Associate tape drives to a specific drive pool by configuring the HPSS tape drives with a non-zero
positive integer Drive Pool ID.
•Modify the end client to dictate that their read request be serviced by tape drives from this
particular Drive Pool.
7.3.1. Tape Drive Configur ation
To associate HPSS tape drives to a specific drive pool, an HPSS administrator will need to configure
HPSS tape drives with a non-zero positive integer Drive Pool ID. The Drive Pool ID can be set at
configuration time via the Tape Device Configuration window (Section 7.1: Configure a New Device &
Drive on page 196); it can be dynamically modified during runtime via the PVL Drive Information
window (Section 7.2.2: PVL Drive Information Window on page 214) as long as the tape drive is locked
and free. To change the value during downtime, you must use the Tape Device Configuration window
and take down the HPSS servers associated with the tape drive: Mover, PVL and PVR. A Drive Pool ID
of zero indicates the default Drive Pool.
7.3.2. Client Application Tape Read Requests
To make use of the Drive Pool feature, HPSS end client applications will need to be modified to dictate
that their read request be serviced by tape drives from this particular Drive Pool. Thi s ability is only
available via the hpss_ReadList() API. The Drive Pool ID must be specified in the ReqSpecInfo structure
of the I/O Descriptor (IOD) passed to hpss_ReadList. This is accomplished by specifying
HPSS_IOD_SUBFUNC_DRIVE_POOL for the SubFunction and the Drive Pool ID for the Argument in
the ReqSpecInfo structure of the IOD. Refer to the HPSS Programmer's Reference - I/O Supple ment for
more information.
7.3.3. Drive Pool Conside rations
If HPSS receives an invalid Drive Pool ID or if the requested Drive Pool ID does not have the
appropriate drive type to handle the request, then the HPSS Client API will return an er ror to the client
for retry.
Since the Drive Pool ID is only used for read requests, all tape writes and tape migrations will use the
default Drive Pool ID. It is recommended that at least one tape drive remain in the default drive pool at
all times in order to satisfy these tape write requests.
Drive pool scheduling may not occur immediately since it could be the case that the drive was alread y
scheduled before the drive was locked and the Drive Pool ID was changed.
If a tape is being read and a request to read the same tape arrives within 45 seconds after the first request
completes, the Core Server will issue the I/O to the existing cartridge/drive. Once the drive t ransitions to
the Deferred Dismount state, a second request with a different Drive Pool ID will result in a dismount
and mount to a drive with the assigned Drive Pool ID.
Clients specifying different Drive Pool IDs for accesses to files from the s ame tape (or set of tape) may
result in more tape mount/unmount activity, depending upon timing. This is another reason why the drive
pool processing is restricted to tape read access only.
All mounts for striped tape volumes will be serviced from the same Drive Pool.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 219