Further Information

ENGLISH

Display modes

i If your computer has previously been used with

a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have reconfigured the computer, preferably to 1024 x 768 at 60Hz.

The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes.

The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using AUTO SETUP and the monitor controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, TFT technology is inherently flicker-free. If possible, configure your computer for 1024 x 768 addressability at 60Hz vertical refresh rate.

For the display modes listed below, the screen image has been optimized during manufacture.

Factory Set Display Modes

Addressabillty

Refresh Rate

Horizontal

Frequency

 

 

 

 

 

 

 

 

640 x 480

60 Hz

31.5 kHz

640 x 480

66 Hz

35.0 kHz

640 x 480

75 Hz

37.5 kHz

 

 

 

640 x 350

70 Hz

31.5 kHz

 

 

 

720 x 400

70 Hz

31.5 kHz

 

 

 

800 x 600

56 Hz

35.2 kHz

 

 

 

800 x 600

60 Hz

37.9 kHz

 

 

 

800 x 600

72 Hz

48.1 kHz

 

 

 

800 x 600

75 Hz

46.9 kHz

 

 

 

832 x 624

75 Hz

49.7 kHz

 

 

 

1024 x 768 †

60 Hz

48.4 kHz

 

 

 

1024 x 768

70 Hz

56.5 kHz

 

 

 

1024 x 768

75 Hz

60.0 kHz

 

 

 

Recommended

Note : VESA timings are as detailed in the VESA “Display Monitor Timing Specification”. Version 1.0, Revision 0.8, Dated 09/17/98.

19

Page 21
Image 21
IBM T 541 manual Further Information, Display modes