Monitor Installation
Connecting your Monitor
1.Turn off your computer and all attached devices. Next, unplug the power cord(s) to your computer and all attached devices.
2.Connect the signal cable.
The analog signal cable is already connected to your monitor. 
The analog connector is the blue connector.
When connecting the analog signal cable (Figure A)
Connect the free end of the attached signal cable to the 
(Figure A)
If connecting a
Connect one end of the monitor signal cable to the white connector 
on the rear panel of the monitor. Connect the other end to the white connector 
on the rear panel of the computer and tighten the screws.
Cable not supplied (Optional)
4 | (Figure B) |
