1030 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state drive (SSD) and storage converter
For access, remove this FRU:
v“1010 Battery pack” on page 63
Attention:
vDo not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
vBefore removing the drive, have the user make a backup copy of all the information on it if possible.
vNever remove the drive while the system is operating or is in suspend mode.
Table 13. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage converter
1
Step | Screw (quantity) | Color | Torque |
|
|
|
|
| Hard disk drive screw, | Black | 0.189 Nm |
|
|
| (1.85 kgfcm) |
|
|
|
|
3
4
2
When installing: Make sure that the HDD connector or SSD connector is attached firmly.
