IBM W500, T500 manual Dimm

1050 DIMM

For access, remove these FRUs in order:

v“1010 Battery pack” on page 63

v“1040 Palm rest or palm rest with fingerprint reader” on page 67

Table 16. Removal steps of DIMM

Note: If only one DIMM is used on the computer you are servicing, the card

must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( : upper slot).

1 b

2

a 1

When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily.

70ThinkPad T500 and W500 (15.4-inch widescreen) Hardware Maintenance Manual