IBM WebSphere Business Integration Adapter Standard connector properties, LogAtInterchangeEnd

Tip: Access this tool from the System Manager.

vConnector Configurator--if WebSphere MQIntegrator is the integration broker

Tip: Access this tool from the IBM WebSphere Business Integration Adapter program folder.

For more information about Connector Configurator, see Appendix B, “Connector Configurator”, on page 55.

A connector obtains its configuration values at startup. During a run-time session, you may want to change the values of one or more connector properties. Changes to some connector configuration properties, such as AgentTraceLevel, are dynamic, taking effect immediately. Changes to other connector properties are static, requiring component restart or system restart after a change. To determine whether a property is dynamic or static, refer to the update method column in Connector Designer.

Standard connector properties

Standard configuration properties provide information that all connectors use. For detailed information about these properties, see Appendix A, “Standard configuration properties for connectors”, on page 33.

Note: Because the connector for i2 supports both the ICS and WebSphere MQIntegrator integration brokers, configuration properties for both brokers are relevant to the connector.

In addition, the following supplemental information on standard connector properties applies to i2.

LogAtInterchangeEnd

Tells whether to log errors on the InterChange Server (ICS).

The default value is false.

MessageFileName

Path of the error message file if it is not located in the standard message location %ProductDir%\connectors\messages. If the message file name is not in a fully qualified path, the message file is assumed to be located in the directory specified by the HOME environment variable or the startup parameter user.home. If a connector message file does not exist, the WBIA API message file is used. If that file does not exist, the InterchangeSystem.txt file is used as the message file.

The default value is i2Adapter.txt.

Connector-specific properties

Connector-specific configuration properties provide information needed by the connector at run time. They also provide a way of changing static information or logic within the connector without having to recode and rebuild it.

The following table lists the connector-specific configuration properties for the connector along with their descriptions and possible values.

Property	Description	Possible values
ApplicationName	Unique name specified for each	i2Adapter
	connector

Chapter 2. Installing and configuring the connector 9