IBM Partner Pavilion PROJECTOR E400 manual Inserting the remote control batteries

Inserting the remote control batteries

When using the remote control for the first time, install the batteries that were supplied. Follow the steps below for inserting new batteries into your remote control.

1.Remove the battery compartment cover by sliding the cover in the direction of the arrow, as shown.

2.Insert the supplied batteries taking note of the polarity (+/-), as shown.

3.Replace the cover, as shown.

Note:

vOnly use AAA alkaline batteries.

vDispose of used batteries according to local government ordinance regulations.

vRemove the batteries when not using the remote for prolonged periods.

4-2IBM E400 PROJECTOR: User’s Guide