CD10022 | CD20030 |
CD10522 | CD20530 |
Key Card Kit Installation |
|
This kit has been designed for use with the CD10022, CD10522, CD20030 and CD20530 ice dispenser. When this kit is installed, ice cannot be dispensed unless a key card is inserted into the key card slot.
The kit contains a universal mounting and a microswitch assembly.
Electrical shock hazard. Electrical shock can cause personal injury. Disconnect power before begining to service components.
1.Make sure all electrical power is disconnected to the dispenser before attempting to install this kit.
2.Remove the plastic molded front panel,
then remove the cover plate which is located below the push button. This cover plate is held in place
3.Now disconnect wire #8 and #9 from the normally open (NO) terminal of the dispense switch (S2) and reconnect it to the normally open (NO) terminal of the room key microswitch.
Connect wire #6 supplied in the kit to the normally open (NO) terminal of the dispense switch (S2) and to the common (C) of the room key microswitch.
Reconnect all of the wires and terminals to make sure the unit is wired correctly and all terminal connections are tight and secure.
9