4
2PANELDESCRIPTION
■Function display
qCHANNELGROUP INDICATOR (p. 6)
Indicates whether a U.S.A. “U,” International “”or Cana-
dian “C” channel is in use.
wCHANNELNUMBER READOUT
➥Indicates the selected operating channel number.
• Refer to CHANNELLIST. (p. 36)
➥In Set mode, indicates the selected condition. (p. 28)
eTRANSMIT INDICATOR(p. 7)
Appears while transmitting.
rBUSYINDICATOR (p. 7)
Appears when receiving a signal or when the squelch
opens.
tCALLCHANNEL INDICATOR (p. 5)
Appears when the call channel is selected.
yLOW POWER INDICATOR (p. 7)
Appears when low power is selected.
uWEATHER CHANNELINDICATOR (pgs. 6, 29)
➥“WX” appears when a weather channel is selected.
➥“WX ALT” appears when the Weather alert function is in
use; blinks when an alert tone is received.
iDSC INDICATORS
➥“DSC” appears when a DSC call is received. (p. 24)
➥“POS REPLY” appears when a Position Reply call or
Position Report Reply call is received. (p. 27)
oCHANNELCOMMENT INDICATOR
➥Channel comment appears if programmed. (p. 8)
➥“ ” scrolls when the battery voltage drops to
approx. 10.8 V DC or below.
➥“ ” blinks during Priority scan; “ ” blinks during
Normal scan. (p. 11)
➥“ ” blinks during Dualwatch; “ ” blinks during Tri-
watch. (p. 12)
!0TAG CHANNEL INDICATOR (p. 11)
Appears when a TAG channel is selected.
!1DUPLEX INDICATOR (p. 6)
Appears when a duplex channel is selected.
!2GPS INDICATOR
➥Appears while valid position data is received.
➥Blinks when invalid position data is received.
➥Disappears when no GPS receiver is connected.