28
SET MODE
7

Set mode programming

Set mode is used to change the conditions of the trans-
ceiver’s functions: Scan type (Normal or Priority,) Scan re-
sume timer, Weather alert, Dual/Tri-watch, DSC watch, Beep
tone, Auto acknowledgement and Favorite channel function.
Available functions may differ depending on dealer setting.

DSet mode operation

qTurn power OFF.
wWhile pushing [!6], turn power ON to enter Set mode.
eAfter the display appears, release [!6].
• “ ” appears at the channel comment indicator.
rPush [!6]to select the desired item, if necessary.
tPush [Y]or [Z]to select the desired condition of the item.
yTurn power OFF, then ON again to exit Set mode.
Beep tone
Starting item
Scan type Scan resume timer Weather alert Dual/Tri-watch
DSC watch Auto acknowledgement
Scrolls
Favorite channel function
Scrolls Scrolls
Push

DSet mode construction