Icom IC-M304, iM304 8

34

8CONNECTIONS AND MAINTENANCE

■Optional MB-69 installation

An optional MB-69

FLUSHMOUNT

is available for mounting the

transceiver to a ﬂat surface such as an instrument panel.

CAUTION:KEEP the transceiver and microphone at least

1 meter away from your vessel’s magnetic navigation com-

pass.

qUsing the template on p. 39, carefully cut a hole into the

instrument panel (or wherever you plan to mount the trans-

ceiver.)

wSlide the transceiver through the hole as shown below.

eAttach the clamps on either side of the transceiver with 2

supplied bolts (5 ×8 mm).

•Make sure that the clamps align parallel to the transceiver body.

rTighten the end bolts on the clamps (rotate clockwise) so

that the clamps press firmly against the inside of the in-

strument control panel.

tTighten the locking nuts (rotate counterclockwise) so that

the transceiver is securely mounted in position as below.

yConnect the antenna and power cable, then return the in-

strument control panel to its original place.

Contents

Main FOREWORD D FEATURES IMPORTANT EXPLICIT DEFINITIONS IN CASE OF EMERGENCY NOTE USING DIGITALSELECTIVE CALLING DISTRESS CALL PROCEDURE USING CHANNEL 16 DISTRESS CALL PROCEDURE RADIO OPERATOR WARNING TABLE OF CONTENTS iv PRECAUTIONS OPERATING RULES DDPRIORITIES DDPRIVACY DDRADIO LICENSES Radio license for boaters (U.S.A. only) PANEL DESCRIPTION Front panel w q ertyui Microphone 2 Function display i !1 !0 BASIC OPERATION Channel selection Channel 16 Channel 9 (Call channel) 3 U.S.A.,Canadian and international channels Weather channels Receiving and transmitting CAUTION: re u rt 3 Call channel programming Channel comments Microphone lock function Display backlighting AquaQuake water draining function SCAN OPERATION Scan types SCAN OPERATION Setting TAG channels Starting a scan DUALWATCH/TRI-WATCH Description Operation Dualwatch Tri-watch DSC OPERATION MMSI code programming MMSI code check DSC address ID DProgramming address ID DDeleting address ID Position indication Distress call Transmitting DSC calls DTransmitting Individual call DTransmitting Individual acknowledgement DTransmitting Group call Page DTransmitting All Ships call DTransmitting Position Request call DTransmitting Position Report call Receiving DSC calls DReceiving a Distress call DReceiving a Distress acknowledgement DReceiving a Distress Relay call DReceiving an Individual call DReceiving a Group call DReceiving an All Ships call DReceiving a Geographical Area call DReceiving a Position Request call DReceiving a Position Report call DReceiving a Position Reply call DReceiving a Position Report Reply call SET MODE Set mode programming DSet mode construction DSet mode operation SET MODE Set mode items DScan type DDScan resume timer DDWeather alert DDDual/Tri-watch 7 DDDSC watch DDBeep tone DDAutomatic acknowledgement DDFavorite channel CONNECTIONS AND MAINTENANCE Connections 8 Supplied accessories Antenna Fuse replacement Cleaning Mounting the transceiver DDUsing the supplied mounting bracket Optional MB-92 attachment 8 Optional MB-69 installation TROUBLESHOOTING CHANNEL LIST SPECIFICATIONS AND OPTIONS Specications General Transmitter Receiver 11 MB-69 DDDimensions Options FLUSHMOUNT KIT For mounting the transceiver to a panel. MB-92 TEMPLATE