
13
6
DSC OPERATION5
6
■MMSI code programming
The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only twice.
qTurn power OFF.
wWhile pushing and holding [DSC], turn power ON to enter
MMSI code programming condition.
eAfter the display appears, release [DSC].
•A cursor starts blinking.
rEdit the specified MMSI code by pushing [Y]or [Z].
• Push [!6]or [CH/WX] to move the cursor forward or backward,
respectively.
tInput 9-digit code, then push [DSC]to set the code.
•Returns to the normal operation.
■MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked.
qPush [DSC]to enter the DSC menu.
wPush[Y]or [Z]to select “ ” and push [DSC].
eCheck the 9-digit MMSI (DSC self ID) code.
• The MMSI code is displayed and scrolls at the channel comment
indicator.
rPush [DSC]to return to the normal operation.
MMSI (DSC self ID) code scrolls