12
DUALWATCH/TRI-WATCH
5

Description

Dualwatch monitors Channel 16 while you are receiving
on another channel; Tri-watch monitors Channel 16 and the
call channel while receiving another channel. Dualwatch/Tri-
watch are convenient for monitor Channel 16 when you are
operating on another channel.

Operation

qSelect Dualwatch or Tri-watch in Set mode. (p. 29)
wSelect the desired channel.
ePush and hold [DUAL] (CH/WX) for 1 sec. to start Dual-
watch or Tri-watch.
•“ ” blinks during Dualwatch; “ ” blinks during Tri-watch.
•A beep tone sounds when a signal is received on Channel 16.
rTo cancel Dualwatch or Tri-watch, push [DUAL](CH/WX).
DUALWATCH/TRI-WATCH SIMULATION
•If a signal is received on Channel 16, Dualwatch/Tri-watch
pauses on Channel 16 until the signal disappears.
•If a signal is received on the call channel during Tri-watch,
Tri-watch becomes Dualwatch until the signal disappears.
•To transmit on the selected channel during Dualwatch/Tri-
watch, push and hold [PTT].

Dualwatch Tri-watch

Call channel
[Example]:Operating Tri-watch on INT Channel 25
Tri-watch starts.
Signal is received on call
channel.
Signal is received on
Channel 16 takes priority.
Tri-watch resumes after
the signal disappears.
Push and hold
for 1 sec.