Using the iH9
Connect iH9 to Power Source
Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120 VAC wall socket. Adaptor must be plugged in to operate. The iH9 does not operate on batteries.
Setting the Clock
a) Press and hold the Time Zone Button until the display flashes.
b)Turn the Set Wheel to select your time zone.
c)Press the Time Zone Button again. The clock will display the current time in your time zone.
d) | To adjust the time for Daylight Saving Time, slide the DST switch to +1 to advance the time 1 hour. |
| Slide to |
To Set Clock Manually | |
a) | Press and hold the Clock Adjust Button. The clock display will flash. |
b) | Turn the Set Wheel until the current time is displayed (a PM indicator appears when time is set to PM; there is no AM indictor). |
c)Press the Clock Adjust Button to accept the time. The year display will flash.
d)Turn the Set Wheel to adjust the year and press the Clock Adjust Button. The date display will flash.
e)Turn the Set Wheel to adjust the date and press the Clock Adjust Button. Two beeps will indicate clock setting is complete. Use DST switch to adjust for Daylight Saving Time.
Using the Alarms
The iH9 has two independent alarms. Each can be set to wake you to iPod, iPod playlist, radio or buzzer at separate times.
Setting the Alarms
a) Press and hold the Alarm 1 or Alarm 2 Button until the alarm time flashes.
b)Turn the Set Wheel to set the alarm time.
c)Press the Alarm Button again and turn the Set Wheel to select having the alarm come on all week (7days), only weekdays (5 days) or just weekends (2 days).
d)Press the Alarm Button again and then turn the Set Wheel to select a wake source: Buzzer, iPod, iPod playlist* (PLYLST) or Radio (last selected station).
*PLAYLIST: To wake to an iPod playlist, you must a create a playlist in iTunes called ‘iHome’ and import it to your iPod. When PLYLST is set as your wake to source, the iH9 will wake to random songs in your iHome playlist.
Note: If wake to source is set to iPod or playlist and iPod or playlist is not present, the iH9 defaults to buzzer alarm.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
a)Press an Alarm Button to preview current alarm time(s). Press again to arm or disarm alarm function. When armed, the related alarm icon appears in the display.
Resetting the Alarm to Come on the Next Day
a) When the alarm is sounding, press the Alarm Reset/Power Button to stop the alarm and reset it to come on the following day.
Snooze
a)Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again after the selected snooze time. Snooze can be pressed several times during the 2 hours alarm cycle.
b) To adjust the snooze time, during normal mode press and hold the Snooze/Dimmer Button until the display flashes. Use the Set Wheel to adjust snooze time from 1 to 29 minutes.
Sure Alarm
The iH9 has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup batteries are installed.
iPod
Playing and charging your iPod
a) Place proper insert for your iPod (see insert table under Quick Start) in Dock, then gently dock iPod. When docked, your iPod will charge until fully charged. Unit will not overcharge iPod. Note: The iH9 will not control or charge 3G iPod models.
b) Press the Play/Pause Button to play iPod, and again to pause. c) Turn Volume Wheel to adjust iH9 volume up or down
d)Press the EQ Button to select Treble, Bass, 3D sound effect or Balance. Turn the Set Wheel to adjust settings. EQ settings for iPod and radio mode are independent.
e) Press Alarm Reset/Power Button to turn iH9 and iPod off.
Note: If you dock an iPod with a drained battery, it may take up to 6 minutes of charging before the iPod will respond.
3
