4. Press the power switch on the monitor. The power light comes on.
Power switch
Power lighit
Notes:
a.When you turn off the monitor, wait at least five seconds before turning it on again.
b.If you accidentally disconnected the power cord from the main outlet and you connected it to the outlet again, the screen may flicker continuously. To stop the flicker, press the power switch and turn off the monitor, then turn it on again.
c.Refer to “Knowing the operating status of your monitor” on page 16 for more information on the power light.
This completes the hardware setup.
Supplementary Information
When powering on the different units, power them on in the following sequence:
1.Monitor
2.Peripheral units
3.Computer
10AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL
