OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional Menu items which can be switched by using the + / - Buttons.
| Luminance |
Contrast | 50 |
Brightness | 50 |
Eco | Off |
Picture Mode | Standard |
ACR | ON |
BSelect the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight the desired adjustment icon.
CPress the MENU Button again. Use the + / - Buttons to make the appropriate adjustment or setting.
DPress the AUTO Button to leave the menu, and the settings you just made would be automatically saved.
For example, to correct for vertical position, select Menu item of Image Setup and then press the MENU Button. Then, select V.Position by using the + / - Buttons.
An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this.
Press the AUTO Button lastly, it ends, any changes are saved in the memory.
|
| Image Setup | |||||
| Clock |
|
|
| 50 | ||
| Phase |
|
|
|
|
| 50 |
| H.Position |
|
|
|
|
|
|
|
|
|
|
| 50 | ||
| V.Position |
|
|
|
| 50 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH
NOTE
When button operations are aborted during adjustment,
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
OPERATING THE MONITOR 13
