ENGLISH
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1.Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.
2.Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.
3.If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem | Check |
A The picture does not appear.
(Power indicator does not light up.)
(Power indicator is blue.)
(Power indicator is orange.)
B The screen is not synchronized.
C T h e s c r e e n position is not in the center.
D The screen is too bright or too dark.
ET h e s c r e e n i s shaking.
The Power Cable is firmly seated in the socket. The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness. The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor. The video output level of the computer is within the specification of the
monitor.
The signal timing of the computer is within the specification of the monitor.
The video output level of the computer is within the specification of the monitor.
The power voltage is within the specification of the monitor.
The signal timing of the computer is within the specification of the monitor.
24 TROUBLE SHOOTING
