![](/images/new-backgrounds/1290675/290675145x1.webp)
How to Access the Fault Log When a fault condition occurs, motor operation stops and a fault code is displayed on the keypad display. The control keeps a log of up to the last 31 faults. If more than 31 faults have occurred the oldest fault will be deleted from the fault log to make room for the newest fault. To access the fault log use the following procedure:
Action | Description | Display | Comments | |
|
|
|
|
|
Apply Power |
|
|
| Logo display for 5 seconds. |
|
|
| ||
| Display mode showing output |
| Display mode. | |
|
| |||
|
| |||
| frequency |
|
| |
Press DISP key 5 times | Use DISP key to scroll to the |
|
| |
|
| |||
|
| |||
| Fault Log entry point. |
|
| |
Press ENTER key | Display first fault type and time |
| Typical display. | |
| ||||
| ||||
| fault occurred. |
|
| |
Press Y key | Scroll through fault messages. |
|
| If no messages, the fault log exit |
|
| |||
|
| |||
|
|
|
| choice is displayed. |
|
|
|
|
|
Press ENTER key
Return to display mode.
Display mode stop key LED is on.
| MN722 |