
Display Mode Continued
Fault Log Access When a fault condition occurs, motor operation stops and a fault code is displayed on the Keypad display. The control keeps a log of up to the last 31 faults. If more than 31 faults have occurred the oldest fault will be deleted from the fault log to make room for the newest fault. To access the fault log perform the following procedure:
Action | Description | Display | Comments | |
|
|
|
|
|
Apply Power |
|
|
| Logo display for 5 seconds. |
|
|
| ||
| Display mode showing motor |
| Display mode. | |
|
| |||
|
| |||
| speed. |
|
| |
Press DISP key 5 times | Scroll to the Fault Log screen |
| Fault Log access screen. | |
| ||||
| ||||
Press ENTER key | Display first fault type and time |
| 1=Most recent fault displayed. | |
| ||||
| ||||
| fault occurred. |
| 2=Second most recent fault, etc. | |
Press Y key | Scroll through fault messages. |
|
| If no messages, the fault log exit |
|
| |||
|
| |||
|
|
|
| choice is displayed. |
|
|
|
|
|
Press ENTER key
Return to display mode.
Display mode stop key LED is on.
MN722 | Programming & Operation |