ENGLISH | 16 |
To refit the door
1.Insert the hinges in their seats.
2.Open the door fully.
3.Lower the two catches.
4.Close the door
Moving the top heating element (some models only)
1. Remove the oven runners (Fig. 5).
Fig. 5
2.Pull the heating element out a little (Fig. 6) and lower it.
Fig. 6
3.To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral supports (Fig. 7).
Fig. 7
To replace the rear lamp
1.Disconnect the oven from the power supply.
2.Unscrew the lamp cover (Fig. 8), replace the lamp (see note for lamp type) and screw the lamp cover back on.
Fig. 8
3. Reconnect the oven to the power supply.
NOTE:
Only use
Lamps are available from IKEA After Sales Service.
i IMPORTANT: using halogen lamps, do not handle with bare hands since
fingerprints can damage them.
Do not use the oven until the lamp cover has been repositioned.
