IKEA OV9 manual English

ENGLISH 12

Inserting the door and the glass panel

When the cleaning procedure is completed, insert the glass panel and the oven door. To do so, follow the steps in reverse.

The inner glass panel must be assembled keeping the decorative frame (screen-print- ing) turned towards outside of the oven. To double check you did the above operation in a proper way simply pass your fingers on the inner glass surface. If the panel of glass is as- sembled correctly you should not feel any roughness.

Insert the internal panel of glass into the right seats as shown below.

Side rails

To clean the side walls of the oven cavity, re- move the side rails.

12

To put the side rails back, follow the instruc- tion in reverse.

Important! The rounded ends of the guide bars must point to the front.

Changing the oven lamp and cleaning the glass cover

Warning! Before you change the oven lamp (refer to "Product description"),

switch off the appliance and disconnect it from the electrical supply.

1.Turn the glass cover anti - clockwise and remove it. Clean the glass cover.

2.If necessary, replace the old oven lamp with a 15/25 watt, 230V (50Hz), 300 °C heat resistant oven lamp (Connection type: E14).

3.Refit the glass cover.

2

1

Pull the rails away	Then unhook the
from the oven wall	rails at the back.
at the front.