OPERATIONAL INSTRUCTIONS

Basic Operation with iPhone or iPod

Installing the dock adapter

Before docking your iPhone or iPod on iMM9400/9500, a dock adapter must be properly installed. Please make sure you are using a correct dock adapter for your iPhone or iPod and that it is properly inserted into the universal adapter of iMM9400/9500. Failure to do so may damage your iPhone or iPod.

Playing your iPhone or iPod

 

 

1.

Carefully dock your iPhone or iPod.

1.

2.

Press

to turn on the unit. Repeatedly press MODE until

 

 

“iPod” shows on the display. If not in already in iPod mode,

 

 

press

to begin playback of your iPhone or iPod .

 

3.

Press the

or

to select desired track.

 

4.

Press and hold the

or

to search track.

 

Pause

 

 

 

 

 

To briefly interrupt playback, press .

 

1.

Press

again to restart play.

 

2.

To end the iPod playback, select another mode,

 

 

or press

to turn OFF the unit.

 

Repeat

Press while your iPhone/iPod music is playing.

1.Press once during iPhone/iPod music is playing. Current track will repeat.

2.Press twice during iPhone/iPod music is playing. All tracks will repeat.

Shuffle

Press while your iPhone/iPod music is playing.

·Press while iPhone/iPod music is playing. iPod will start random playing. Press again to change normal playing mode.

Charging your iPhone or iPod

To charge your iPhone or iPod, insert your iPhone or iPod into the built-in universal dock. Ensure that iMM9400/9500 is connected to an outlet.

OPERATIONAL INSTRUCTIONS

Amplifier and Radio Operation

Switching the unit ON

Press to turn on the system.

Selecting the mode

The different operating modes can be directly selected by repeatedly pressing MODE on the top panel or iPod, SD Card, USB, CD, AUX or AM/FM on the remote control.

Adjusting the volume

To adjust the volume, press VOLUME +/-.

To turn the sound off, press MUTE. This function is indicated

when the word, appears in the display.

By pressing MUTE or VOLUME +/- again, the sound will turn back on.

Dimmer control

1.Press DIMMER to adjust the brightness of LCD backlight.

2.There are three steps including “Off,” “ Low “ , “ High “

Headphone jack

The headphone jack is for headphones equipped with a 3.5mm jack. Use an adapter (sold separately) if your headphone has a different plug. The speakers are automatically switched off when the headphones are being used.

AM/FM radio operation

1. Turn the unit on by pressing .

2. Switch to the Tuner operating mode by pressing AM/FM.

Manual station selection

1. Press AM/FM to switch between AM and FM.

2. Press or to tune to the desired radio station.

15 iLuv

iMM9400/9500 V10M10_IM_EN_060509

iLuv 16

Page 9
Image 9
Iluv IMM9500, IMM9400 instruction manual Basic Operation with iPhone or iPod, Amplifier and Radio Operation