TESTING AND TREATING THE WATER

The hydrotherapy spa comes with a starter chemical pack for maintaining the water in the spa. Disregard the directions on the individual packages of ÒQUICK pHix It DOWNÓ and ÒQUICK pHix It UP.Ó However, the directions on the bottle of ÒNon-chlorine ShoxÓ and ÒBromine BaseÓ are correct. Always keep the chemi- cals away from children and pets.

The first time you use the spa, you should test and treat the water. You must also treat the water each time you refill the spa. Once you have verified that the spa is functioning properly, and have allowed the water to circulate for a while, you should remove the spa cover and add 1/3 of the ÒBromine BaseÓ bottle, and 1/3 of the ÒNon-chlorine ShoxÓ bottle to the water in the spa. Allow the water to circulate for five min- utes. You should now test the pH level of the water by using the included test strips. Refer to the test strip packaging for instructions on using the test strips. The pH reading should be between 7.2 and 7.8.

If the level is too low, add half of one of the ÒQUICK pHix It UPÓ packets to the water. Let the water circu- late through the spa for five minutes. Test the pH level again. Repeat until the pH level is correct.

If the level is too high, add half of one of the ÒQUICK pHix It DOWNÓ packets to the water. Let the water cir- culate through the spa for five minutes. Test the pH level again. Repeat until the pH level is correct.

See WATER CHEMISTRY on page 14 for information concerning proper water maintenance.

STARTING THE RENEW 207

Once you have tested the GFCI, you should verify the water flow from the pumping unit. Set the air control on the console to the lowest setting (see USING THE CONSOLE on the next page). The pumping unit will heat the water as it pumps. Cover the RENEW 207 with the spa cover and liner. The spa cover must be tight. (See SECURING THE SPA COVER on page 12.) The water will heat at about 3.0¡ F per hour with the cover on. If you are using the spa indoors and the room temperature is maintained at 70¡ F, it will take approximately 10 to 20 hours for the water to reach the set temperature.

The temperature and water flow can be set or changed by the controls on the console (see USING THE CONSOLE at the right).

USING THE CONSOLE

The function of each console control is explained below:

Temperature

Air

Control

Control

 

Pump Control

Temperature Control: This control is used to set the temperature of the water. The water heats at about 3.0¡ F per hour with the cover on. The thermostat can be set to heat the water from 70¡ F to 104¡ F. Always use an accurate thermometer to check the tempera- ture of the water.

Note: The RENEW 207 features automatic freeze pro- tection. If the water temperature falls below 40¡ F, the pump will begin circulating and heating the water to prevent the water from freezing.

Pump Control: This control turns the thera-jets on and off. To turn the thera-jets on, press the control once. To turn the thera-jets off, press the control again. The thera-jets will remain off for 20 minutes. After 20 minutes, the pump will begin cycling to heat the water if the temperature falls below the minimum setting. Note: To keep the heat cycle from running, the power cord must be unplugged.

Air Control: This control determines the amount of air flowing through the thera-jets during operation. If the control is turned counterclockwise, the amount of air will increase; if the control is turned clockwise, the amount of air will decrease.

11

Page 10 Page 12
Page 11
Image 11
Image 831.21007 manual Testing and Treating the Water, Starting the Renew, Using the Console
Page 10 Page 12

831.21007 specifications

Image 831.21007 represents a pioneering advancement in modern imaging technology, showcasing a harmonious blend of state-of-the-art features that cater to the evolving demands of users across various domains. This image not only reflects exceptional visual quality but also embodies the innovation that defines contemporary visual media.

One of the standout characteristics of Image 831.21007 is its resolution, which offers an impressive level of detail. With ultra-high-definition capabilities, users can experience crisp, clear visuals that enhance both personal and professional applications. Whether utilized in digital art, photography, or scientific visualization, the image ensures that every intricate detail is preserved, enabling users to engage deeply with the content.

In addition to its resolution, Image 831.21007 employs cutting-edge color reproduction technologies. Leveraging advanced color management systems, this image excels in delivering vibrant and accurate hues that resonate with viewers. The ability to reproduce colors that closely resemble real-life shades is particularly beneficial for fields such as graphic design and marketing, where visual fidelity is paramount.

The image’s dynamic range is another notable feature, allowing for a wide spectrum of brightness levels. With highlights and shadows rendered with exceptional clarity, viewers can appreciate nuances that would be lost in lesser-quality visuals. This dynamic range capability makes Image 831.21007 ideal for applications like video production and cinematic presentations, where lighting conditions can vary significantly.

Furthermore, Image 831.21007 is optimized for compatibility with various software and hardware platforms, ensuring seamless integration into existing workflows. This adaptability is crucial for users who operate in diverse technological environments, enabling them to maximize the potential of their creative tools without facing compatibility issues.

Lastly, the image is designed with user experience in mind, featuring intuitive interfaces that simplify navigation and usage. Whether for casual viewing or professional editing, Image 831.21007 empowers users by providing accessible functionality alongside its robust feature set.

In summary, Image 831.21007 stands out as a hallmark of modern imaging excellence, characterized by high resolution, superior color accuracy, an extensive dynamic range, compatibility, and user-friendly design. It embodies the future of visual media, catering to the growing demand for exceptional quality across countless applications. With such a rich set of features, this image is poised to inspire creativity and innovation in various fields.
Top Page Image Contents