Image 831.21007 Securing The Spa Cover, Always keep the, buckles locked, when the spa is not

SECURING THE SPA COVER

The spa cover can be secured by snapping the latches on the spa cover into the buckles on the side of the spa.

After the spa cover is
secured, it can be fur-
ther tightened by	Adjustment
adjusting the self-	Flaps
attaching flaps on

The buckles can be locked by inserting the key and turning it clockwise 1/4 turn. To unlock the buck- les, insert the key and turn it counter- clockwise 1/4 turn.

Latch
Key	Buckle

each end of the spa

cover.

Always keep the

buckles locked

when the spa is not

in use. Keep the keys in a safe place, out of the reach of children.

SPA JET OPERATION

B

	B
	C
A	E
	D

Refer to the diagram above. The function of each fea- ture is explained below:

The three fixed thera-jets(A), located on one end of the spa, focus a water massage on your back.

The three adjustable thera-jets(B) can be adjusted for a custom water massage. One of the jets focuses a water massage on your lower back, a second jet focuses a water massage on your upper back, and a third jet near the floor of the spa focuses a water mas- sage on your legs. Note: The adjustable thera-jets can be closed and opened by pushing and pulling the nozzles. If no air flows through the thera-jets when the air control is turned counterclockwise, simply pull the nozzles slightly.

The filter (C) can be removed for cleaning and replacement (see CHECKING AND CLEANING THE FILTER on page 13).

The suction vents (D), located near the floor of the spa, bring water into the pump in order to operate the system. The suction covers should always be in place over the suction vents. Never operate the spa with- out the suction covers in place.

The spa is ozone ready. An optional ozone generator can be installed to utilize the ozone jet (E). Ozone provides a way to help sanitize your spa with minimal chemical treatment.

12