Image IMBE40890 manual

13.Insert two M10 x 68mm Bolts (33) into the 2-hole Support Plate (70), the Front Leg (19), and the brack- et on the Bench Frame (5) as shown. Tighten an M10 Nylon Locknut (11) onto each Bolt.

14.Align the bracket on the Bench Frame (5) with the holes in the center of the Crossbar (20). Attach the Bench Frame (5) to the Crossbar with two M10 x 68mm Bolts (33) and two M10 Nylon Locknuts (11).

15.Attach the Leg Lever Lock (41) to the indicated hole in the Front Leg (19) with an M8 x 64mm Bolt (43), two M8 Washers (23), and an M8 Nylon Locknut (13).

Do not overtighten the Nylon Locknut; the Leg Lever Lock must pivot easily.

Attach the Bumper (48) to the indicated hole in the Front Leg (19) with a Bumper Screw (64).

16.Press a 2Ó Square Inner Cap (17) into each end of the Leg Lever (18). Press a 48mm Round Inner Cap

(12)into the end of the weight tube on the Leg Lever.

Lubricate an M10 x 75mm Bolt (8). Attach the Leg Lever (18) to the bracket on the Front Leg (19) with the Bolt and an M10 Nylon Locknut (11). Do not overtighten the Nylon Locknut; it must be easy to pivot the Leg Lever.

13	11
	5
33	11
	19
	70
14
	33

		5	11	20
15
13		19
		23
	23		41
64	48		43
16		11		Lubricate
		17
	18
		19		8
17
12		17

11