ATTACHING WEIGHTS TO THE WEIGHT CARRIAGE
To use the upper or lower pulley stations, slide the desired amount of weight (not included) onto the weight tube of the Weight Carriage (47). Secure the weights with Weight Clips (50).
WARNING: Do not place more than 150 pounds on the Weight Carriage. Always place the same amount of weight (not included) on each side of the Weight Carriage. Always secure the weights with the Weight Clips (50).
LOCKING THE LEG LEVER
The Leg Lever (18) can be locked by rotating the Leg Lever Lock (41) until it snaps into place over the Pad Tube (38). Note: A Foam Pad has been removed for clarity; it does not have to be removed to lock the Leg Lever.
ATTACHING THE LAT BAR OR NYLON STRAP TO THE UPPER OR LOWER PULLEY STATIONS
To use the upper pulley station, attach the Lat Bar (46) or the Nylon Strap (73) to the Upper Cable (45) with the Cable Clip (40). The Lat Bar or Nylon Strap can be attached to the lower pulley station in the same manner.
Other attachments, such as an ankle strap, can be attached to the pulley stations as described above.
IMPORTANT: See assembly step 12 on page 10 for information on how to tighten the cables.
ATTACHING THE CURL POST TO THE FRONT LEG OR USING IT AS A SEAT
To use the Curl Pad (44), insert the Curl Post (42) into the Front Leg (19) and line up one of the adjustment holes in the Curl Post with the hole in the Front Leg. Insert the Adjustment Knob (36) through the Curl Post and tighten it into the welded nut on the Front Leg.
For certain exercises, the Curl Pad (44) can be used as a seat. To do this, turn the Curl Pad around, compared to the picture, and mount it on the storage tube on the Right Upright (2). The Curl Pad can also be stored here when it is not in use.
15
50 | Weight |
| Tube |
| 50 |
| 47 |
18 |
|
| 41 |
| 38 |
| 45 |
| 40 |
| 46 |
| 73 |
| 2 |
| Storage |
44 | Tube |
| 36 |
| 42 |
| 19 |
