IMC Networks SNMP

Saved Values

This section displays changes made during current session:

• IP Address (MUST be assigned during initial configuration)

• Subnet Mask (MUST be assigned during initial configuration)

• Default Gateway

Current Values

This section displays values currently in use:

• IP Address (IP address of SNMP agent)

• Subnet Mask (mask to define IP subnet agent is connected to)

• Default Gateway (default router for IP traffic outside subnet)

Command List

This section displays the commands available:

• I = Enter New Saved Parameter Values

• P = Change Password

• T = New Trap Destination

• K = Remove ALL Trap Destinations

• C = New Community String

• U = Delete ALL Community Strings

• D = Enable/Disable DHCP

• E = End Session

• Space Bar = Device Specific Configuration commands

NOTE

Reboot

after making any modifications to the

saved parameter values

or the changes

will not take effect. To reboot, type

REBOOT

at the prompt on the main configuration

screen, or turn the chassis

OFF

then

again by turning off the switches on the back of

the power supplies, or reseat the module.

Assigning TCP/IP Information

To modify the saved parameter values (i.e., assign IP address and subnet

mask), press I. Enter the IP address and subnet mask for the connected