STEP 5 (See Diagram 5)
A.) Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach the Main Seat Support (#18) onto the Front Post (#22). Attach the Seat Bracket (#24) onto the Main Seat Support. Align the holes. Secure the Seat Bracket, Main Seat Support, and Front Post together with two M10 x 2 ¾”Carriage Bolts (#70), two Ø ¾” Washers (#84), and two M10 Aircraft Nuts (#86).
C.) Secure the Main Seat Support to the Front Post with one M10 x 2 ¾” Allen Bolt (#74) and Ø ¾” Washer (#84).
D.) Attach the Main Seat Support to the Bench Rear Stabilizer (#23). Secure it with two M10 x 2 ¾” Carriage Bolts (#70), one 4 3/8” x 1 ¾” Bracket (#37), two Ø ¾” Washers (#84), and two M10 Aircraft Nuts (#86).
E.) Securely tighten all Nuts and Bolts installed.
DIAGRAM 5
11
