STEP 4 (See Diagram 4)

A.) Attach the Main Seat Support (#1) to the Front Vertical Frame (#3). Secure it with two M10 x 3 ¾” Carriage Bolts (#79), one 4 ¾” x 1 ¾” Bracket (#22), two ¾” Washers (#84), and two M10 Aircraft Nuts (#83).

B.) Attach the Seat Bracket (#20) onto the Main Seat Support. Place the Seat Pad (#38) onto Main Seat Support and Seat Bracket. Secure it with two M8 x 3” Allen Bolts (#74), two M8 x 5/8” Allen Bolts (#76), and four Ø 5/8” Washers (#86).

C.) Attach the Leg Developer (#11) to the open bracket on the Main Seat Support. Secure it with one M12 x 3 1/8” Allen Bolt (#81), two Ø 1” Washers (#85), and one M12 Aircraft Nut (#91).

D.) Insert the Foam Tube (#28) halfway through the holes on the Leg Developer. Push two Foam Rolls (#64) onto the Foam Tube from both ends.

E.) Attach the Arm Curl Pad (#40) to the Arm Curl Stand (#12). Secure it with two M8 x 5/8” Allen bolts (#76) and two Ø 5/8” Washers (#86). Insert the Arm Curl Stand into the front opening on the Main Seat Support. Use a M18 Lock Knob (#54) to lock the Arm Curl Stand in position.

DIAGRAM 4

13

Page 14
Image 14
Impex PM-3200 manual Diagram