STEP 7 (See Diagram 7)
A.) Attach one 65 ¾” Upper Cable (#21) to a Large Pulley (#28). Attach the Large Pulley to an
Upper Swivel Pulley Bracket (#13) on the Upper Frame. Secure the Large Pulley to the bracket with one M10 x 1 ¾” Allen Bolt (#42), two ∅ 3/4” Washers (#53), and one M10 Aircraft Nut (#50).
B.) Draw the Upper Cable towards the back to the open bracket on the Upper Frame. Repeat Procedure B to install another Large Pulley.
C.) Draw the Upper Cable downward and use a
D.) Attach the Lower Cable to a Large Pulley (#28). Attach the Large Pulley to the Swivel Pulley Bracket (#8) on the Bow Frame. Repeat Procedure B to install the Large Pulley.
E.) Pull the triangle bracket on the Lower Cable upward and connect it to the hooks on the Black (Heavy), Red (Medium), and Blue (Light) Cables.
F.) Repeat Procedure A to E to install the other side.
G.)Connect the Lat Bar (#15) to the two Upper Cables using two Chains (#59), and four
10
