Dishwasher delayed start programming
Dishwasher delayed start programming
Premise: before selecting a wash cycle as indicated in the paragraph entitled "Starting and setting a wash cycle…", a delayed start can be set.
Press button "D" (see
The delayed start indicator light "H" flashes and when the appliance starts, the counter will begin the countdown to the delayed start.
When this time is up, the wash cycle will begin and the counter will now serve to display the amount of time left until the end of the wash cycle.
NOTE:
νit is best if you keep from modifying anything during countdown; if this is absolutely necessary, then turn the knob to the RESET position: 4 beeps and the 3 dashes appearing indicate that all settings have been cancelled
Repeat the operations for "dishwasher delayed start programming" and for "starting and setting the wash cycle" following the instructions in the relative paragraphs.
νShould there be a power failure or should the door of the appliance be opened during the countdown, the latter will come to a stop and will
Wash cycle modification buttons
Half load selection button on upper or lower rack. This can be selected before setting any wash cycle, yet we remind you that you should halve the amount of detergent recommended for the wash cycle you have selected (see wash cycle table).
Press button "I" and you will hear a beep, the indicator "N" appears on the display: you can select which rack to perform the half load on. Each time the button is pressed, you will
hear a beep, and symbol appears indicating the wash
on the upper rack, whereas symbol indicates the wash on the lower rack. Press the button again and you will hear another beep, thereby resetting the selection and the appliance will consequently wash on both racks.
To use the racks correctly, we recommend you read the chapter entitled "Loading the dishes".
GB | 8 |