BE SAFE - NOT SORRY
CLEANING
When you are cooking, keep children away from the vicinity of the appliance.
❍This product is designed as a domestic cooking appliance for the preparation and cooking of domestic food products, and should not be used for any other purpose.
❍Remove all packaging from the appliance before using for the first time.
❍Make sure you read and under- stand the instructions before using the appliance.
❍Keep electrical leads short so they do not drape over the appliance or the edge of the worktop.
❍Keep all flammable materials (such as curtains, furnishings & clothing) away from the appliance.
❍Parts of the appliance may be hot during or immediately after use. Care should be taken to avoid touching heating elements inside the oven. Allow sufficient time for the appliance to cool after switching off.
❍Switch off the electricity supply before cleaning the appliance.
❍Do not drape tea towels over the flue vents or doors, as this creates a fire hazard.
❍When opening the appliance doors, take care to avoid skin contact with any steam which may escape from the cooking.
❍Using aluminium foil to cover the grill pan, or putting items wrapped in foil under the grill creates a fire hazard. The high reflectivity can also damage the element.
❍Do not use the oven with the door inner glass panel removed.
❍Use oven gloves when removing hot food utensils from the oven or grill. The oven / grill and utensils will be very hot when in use.
❍Do not use foil on oven shelves or grill pan, or allow it to block the oven flue, as this creates a fire hazard.
❍When cooking heavy items - eg; turkeys - do not pull the oven shelf out with the item still on the shelf.
❍Never use the appliance for heating a room.
❍All installation, servicing and maintenance work should be carried out by a competent person who will comply with current Regulations, Standards and Requirements.
❍Switch off the electricity supply before changing the oven light bulb, to avoid the risk of electric shock.
❍Warning: This appliance must be earthed.
When you have finished cooking check that all controls are in the off position.
Glass parts
DOOR PANELS,
FASCIA CONTROL PANEL
Do not use abrasive cleaners or polishes. Use a mild cream cleaner - eg; “Cif”. Rinse thoroughly and dry with a soft cloth.
The inner door glass panel can be removed for cleaning, but it must be replaced the right way up (so the reflective side faces outwards) and pushed fully in to the stop position.
Open the door wide, hold the top and bottom edges and slide out. When refitting, take care that the glass is held level and straight with the grooves in the door trims before sliding back in.
| SLIDE |
| UP |
| IN | SIDE | |
SLIDE | THIS |
| |
|
| ||
IN |
|
| |
|
|
|
Painted, plastic and metal finish parts (if fitted)
OVEN DOOR FRAME, DOOR HANDLES,
CONTROL KNOBS
Only use a clean cloth wrung out in hot soapy water.
Stainless Steel surfaces (stainless steel finish models only)
FACIA PANEL, HANDLES, DOOR PANELS
Only use a clean cloth wrung out in hot soapy water, and dry with a soft cloth.
Stubborn marks can be removed using “Luneta”. We recommend that you clean the whole of the stainless steel area to maintain a uniform finish. Supplies can be purchased from H.R.P.C. - contact direct sales order line
✆01772 819 672.
Do not use undiluted bleach or any products containing chlorides as they can permanently damage the steel.
Extra care should be taken when cook- ing food in salted water. Some foods are corrosive - eg; vinegar, fruit juices and especially salt - they can mark or damage stainless steel if they are left on the surface. Turn off and wipe any spillage immediately, taking care to avoid skin contact with any hot surface or spillage.
Sharp objects can mark the surface of stainless steel, but marks will become less noticeable with time.
To maintain the finish of the stainless steel, or to remove any greasy marks, wipe the stainless steel surface spar- ingly with a minimum amount of “Johnson’s Baby Oil” and kitchen paper.
Do not use cooking oils, as these may contain salt, which can damage the stainless steel surface.
4
21
