Indesit I6I6C6A manual Planning cooking with the electronic GB programmer, Setting the clock

Planning cooking with the electronic GB programmer*

Setting the clock

After the appliance has been connected to the power supply, or after a blackout, the display will automatically reset to 0:00 and begin to blink. To set the time:

1. Press the COOKING TIME button and the

COOKING END TIME simultaneously.

2.Within 4 seconds of having pressed these buttons, set the exact time by pressing the + and - buttons. The + button advances the hours and the - button decreases the hours.

Once the time has been set, the programmer automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the time has elapsed a buzzer sounds.

To set the timer proceed as follows:

1. press the TIMER button . The display shows:

N.

2.Press the + and - buttons to set the desired time.

3.When the buttons are released the timer begins counting down and the current time appears on the display.

R

4.After the time has elapsed a buzzer will sound, and this can be switched off by pressing any button

(except the + and - buttons). The symbol will switch off.

!The timer does not switch the oven on or off.

Adjusting the volume of the buzzer

After selecting and confirming the clock settings, use the - button to adjust the volume of the alarm buzzer.

Setting the cooking time with a delayed start

First decide which cooking mode you wish to use and set a suitable temperature using the SELECTOR and THERMOSTAT knobs on the oven.

At this point it is possible to set the cooking time:

1.Press the COOKING TIME button .

2.Within 4 seconds of having pressed this button, set the desired amount of time by pressing the + and - buttons. If, for example, you wish to set a cooking time of 30 minutes, the display will show:

N

3.4 seconds after the buttons are released, the current time (for example 10.00) reappears on the display with the symbol mand the letter A (AUTO).

Next the desired cooking end time must be set:

4.Press the END COOKING TIME button .

5.Within 4 seconds of having pressed this button, adjust the cooking end time by pressing the + and - buttons. If, for example, you want cooking to end at 13.00, the display shows:

O

6.4 seconds after the buttons are released, the current time (for example 10.00) reappears on the display with the letter A (AUTO).

P

At this point, the oven is programmed to switch on automatically at 12:30 and switch off after 30 minutes, at 13.00.

Setting the cooking time with an immediate start. Follow the above procedure for setting the cooking time (points 1-3).

!When the letter A appears, this indicates that both the cooking time and the end cooking time have been programmed in AUTO mode. To restore the oven to manual operation, after each AUTO cooking

mode press the COOKING TIME and END

COOKING TIME buttons simultaneously.

!The symbol mwill remain lit, along with the oven, for the entire duration of the cooking programme.

The set cooking duration can be displayed at any

time by pressing the COOKING TIME button , and the cooking end time may be displayed by

pressing the END COOKING TIME button . When the cooking time has elapsed a buzzer sounds. To stop it, press any button apart from the + and - buttons.

Cancelling a previously set cooking programme

Press the COOKING TIME button and the

COOKING END TIME simultaneously.

Correcting or cancelling previously set data The data entered can be changed at any time by pressing the corresponding button (TIMER, COOKING TIME or COOKING END TIME) and the + or - button.

When the cooking time data is cancelled, the cooking end time data is also cancelled automatically, and vice versa.

If the oven has already been programmed, it will not accept cooking end times which are before the start of the programmed cooking process.

9