Gas connection

The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

HOT PARTS

700 mm

Important: make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”. When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting (BS 669 Current Edition).The gas inlet for the cookers is a threaded G 1/2 gas female fitting.

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

•the hose must never be longer than 1,5 metre;

•the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

Important: the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

Adapting the cooker to different types of gas

In order to adapt the cooker to a different type of gas with respect to the gas for which it was produced (indicated on the label attached to the lid), follow these steps:

a)Replacing the burner nozzles on the hob:

•remove the grids and slide the burners from their housings;

•unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”).

•replace all the components by repeating the steps in reverse order.

b)Minimum regulation of the hob burners:

• turn the tap to minimum;

• remove the knob and adjust the regulation screw, which is positioned in or next to the tap pin, until the

5

Page 4 Page 6
Page 5
Image 5
Indesit KD3G11/G manual Gas connection, Connecting the gas supply, Disposing of the appliance
Page 4 Page 6

KD3G11/G specifications

The Indesit KD3G11/G is a versatile and efficient freestanding gas cooker designed to enhance your cooking experience while providing a range of practical features. With its classic design and modern functionalities, it is an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the KD3G11/G is its four gas burners, which vary in size, allowing users to choose the most appropriate heat source for their dishes. The powerful burners offer precise temperature control, making it easy to simmer, boil, or sear with professional results. The easy-to-use rotary controls enable quick adjustments for a seamless cooking experience.

The cooker also includes a spacious main oven with a generous capacity, perfect for baking, roasting, or cooking multiple dishes simultaneously. The conventional oven heat distribution ensures that food is cooked evenly, while the oven's grill function provides additional flexibility for achieving that perfect golden finish on meats and other dishes.

Another notable technology in the Indesit KD3G11/G is its automatic ignition system. This innovative feature allows users to light the burners with ease, eliminating the need for matches or lighters. This not only enhances safety but also adds convenience to your cooking routine.

Safety is a paramount consideration in the design of the KD3G11/G. It comes equipped with a flame safety device, which immediately cuts off the gas supply if the flame is extinguished, providing peace of mind while cooking. Additionally, the durable enamel oven interior is easy to clean, helping to maintain a hygienic cooking environment with minimal effort.

The sleek and modern outer design, complemented by a classic white finish, allows this cooker to blend seamlessly into any kitchen décor. It is compact enough to fit into smaller spaces while still providing ample cooking power and capacity.

In summary, the Indesit KD3G11/G gas cooker combines practicality, safety, and style. Its user-friendly features, reliable performance, and stylish appearance make it a popular choice for anyone looking to enhance their culinary skills or simply enjoy everyday cooking. Whether you're preparing a family meal or hosting a dinner party, this cooker provides the functionality and reliability needed to create delicious dishes with ease.
Top Page Image Contents