Connecting the drain hose

• the supply voltage is included within the va-

65 - 100 cm

Connect the drain hose, without ben- ding it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

lues indicated on the Technical details table GB (see page 5);

•the socket is compatible with the washing machine’s plug. If this is not the case, repla-

ce the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be under- water.

WARNING - THIS APPLIANCE MUST BE EAR- THED. THE FOLLOWING OPERATIONS SHOULD BECARRIEDOUTBYAQUALIFIEDELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please en- sure that either:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated in the Tech- nical details table (see page 5);

the plug is replaced by a fused 13 ampere re-wearable plug bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug:

Important: the wires in the mains lead are co- loured in accordance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Indesit WME 126 manual Replacing the fuse, Removing the plug, Disposing of the plug
Page 2 Page 4

WME 126 specifications

The Indesit WME 126 is a versatile and efficient washing machine designed to meet the needs of modern households. This front-loading appliance combines performance, functionality, and energy efficiency, making it a popular choice for families and individuals alike.

One of the standout features of the Indesit WME 126 is its impressive washing capacity. With a load capacity of up to 6 kg, this machine allows users to wash larger loads in a single cycle, saving time and energy. This is especially beneficial for busy households that require frequent laundry loads.

The Indesit WME 126 is equipped with a range of wash programs, designed to cater to different fabric types and levels of dirt. These programs include cotton, synthetics, delicates, and even a rapid wash cycle that can clean lightly soiled items in just 30 minutes. This feature is particularly useful for those on the go who need clean clothes in a hurry.

In terms of energy efficiency, the Indesit WME 126 boasts an A+ energy rating, highlighting its ability to reduce energy consumption without compromising on performance. This ensures not only lower utility bills but also a reduced environmental footprint, making it an eco-friendly option for consumers.

The machine utilizes innovative technologies to enhance the washing experience. One such feature is the variable temperature control, which allows users to adjust the water temperature according to the fabric type and level of soiling. Additionally, the adjustable spin speed can be customized up to 1200 RPM, providing users with the ability to tailor the washing cycle to their specific needs.

Another notable characteristic of the Indesit WME 126 is its user-friendly interface. The simple dial and button controls make it easy to select the desired wash program and configure settings, ensuring a hassle-free experience. The machine also includes a delay timer, allowing users to set their wash cycle to start at a more convenient time.

Durability and reliability are key attributes of the Indesit WME 126, built to withstand regular use while maintaining optimal performance. With a modern design, this washing machine fits seamlessly into any laundry room or kitchen aesthetic.

Overall, the Indesit WME 126 stands out as a practical and effective washing machine, making it an excellent investment for anyone seeking a dependable laundry solution. With a combination of essential features and efficient technologies, it meets the diverse washing needs of everyday life.
Top Page Image Contents