may be added by day, by specific date, or always (every day) and then also by time. For example, if cameras should be available every day from 4 pm. to 6 pm., all days would be selected and then a range specified from 16:00 to 18:00 hours.
Settings: Camera settings on the Mobile Gateway™ video server default to NTSC and a default name. To make changes to this settings, click the configure source link. Once this link is selected, the following options appear:
•Name: Enter the name of the video source that will be displayed in the iMViewer™ camera list. This name may be up to 40 characters.
•Disconnect Viewer After: Enter the maximum amount of time in minutes that a viewer is allowed to receive video before being required to reconnect to the camera source. Enter a zero to allow unlimited viewing. This field may be used to prevent viewers from inadvertently remaining connected to a video source indefinitely.
•Source Type: Select whether the analog video input uses NTSC or PAL format.
Draft version 1.7 | 7 |
| Inetcam® and iMViewer™ are the property of Inetcam, Inc. |
