Infinity HTS-20 owner manual Connecting The, Subwoofer

CONNECTING THE

SUBWOOFER...

Figure 11.

There are several ways to connect your subwoofer. Read this section carefully to determine which method is best suited for your installation.

The subwoofer may be fed directly with a low-level signal taken from your receiver’s subwoofer- output to connect your subwoofer. Connect one end of each stereo pair of leads to your pre- amplifier’s left and right outputs and connect the other end to the corresponding left and right LOW-LEVEL INPUTS ❷ on the subwoofer. This cable is included with the system.

Connect your subwoofer to an unswitched AC wall outlet.

SUBWOOFER OUTPUT

L R

LEFT

NOTE: If your receiver has only one subwoofer output, it is recommended that you use the supplied “Y”-connector as shown.

+ L – – R +

SPKR

In

SPKR

Out

SUBWOOFER

RIGHT

SUBWOOFER OUTPUT

Y-Connector

LEFT

Low-Level In

L

R

+ L –	– R +	Low-Level In
SPKR
In		L
SPKR		R
Out

SUBWOOFER

RIGHT

14 ◆ HTS-20 Home-Theater System – Owner’s Manual