Figure 12. Method when connecting subwoofer to satellites.
The subwoofer may be connected to your system using the SPEAKER-LEVEL INPUTS ❶ on the plate located on the rear panel of the subwoofer. Use speaker wire, maintaining proper polarity (+ to + and – to –). Attach the speaker wire to the left and right SPEAKER-LEVEL INPUTS on the subwoofer and the other ends to the proper left and right OUTPUTS on your amplifier or receiver. Then connect the outputs of the subwoofer to the front left and right satellites as shown in Figure 12. The additional speaker wires required for this connection method are not included with the system.
Connect your subwoofer to an unswitched AC wall outlet.
AMPLIFIER | | | |
| OUTPUTS | | | | |
LEFT | RIGHT | | | |
+ | – | – | + | | | |
| | | | | SUBWOOFER |
+ | L – | – R | + | Crossover | | |
| | | Low-Level In | Power | Volume |
SPKR | | | | Bypass |
| | | |
In | | | L | On | | |
| | | | |
| | | | | Phase | |
SPKR | | | R | Off | | |
Out | | | | | Min Max |
| | | | | |
L. SATELLITE | R. SATELLITE |
Rear View | Rear View |
HTS-20 Home-Theater System – Owner’s Manual ◆ 15
