CENTER CHANNEL...
IMPORTANT!
Figure 9. The satellites and center-channel speaker feature terminals that can be connected in several different ways; e.g., banana plugs, spade terminals and direct wiring (as shown here).
Observe polarities when making speaker connections, as shown in Figure 9 (below). Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on the speaker. Connect the – (black) terminals in the same way.
Do not reverse polarities (i.e., + to – or – to +) when making connections.
Center Channel
(rear view)
Black = –
❷Insert Bare End; Tighten Terminal
Red = +
❶ Loosen
Terminal
No Stripe = – | Stripe = + |
Speaker Wire
12 ◆
