Infinity HTS-20 Shelf Placement Of The Satellites, Vertical Position, Horizontal Position

VERTICAL POSITION...

Figure 3. This illustration shows how to vertically position the speakers two ways.

HORIZONTAL POSITION...

SHELF PLACEMENT OF THE SATELLITES

The satellite speakers can be positioned vertically in two positions on a shelf or stand, as shown in Figure 3. Set each satellite flat, with the logo at the bottom and the bracket facing inward. You can also push the speakers gently back for a 20° tilt.

VERTICAL PLACEMENT ON A SHELF

(side view) (side view)

Flat	20° Tilt-Up
Position	Position

The satellite speakers can also be positioned horizontally in three positions on a shelf, as shown in Figure 4. Set each speaker flat, or push the speakers gently back for a 20° tilt. Rotate the logo to match the orientation of the speaker. To provide a 10° tilt-down angle, loosen the bracket screw on the rear door with the hex wrench (included) and adjust the bracket to Bracket Open, Position #1. Tighten the bracket screw when you have reached the desired angle.

NOTE: You may want to route the wires before tightening the bracket screw (see Figure 8 on page 11).

HORIZONTAL PLACEMENT ON A SHELF

Figure 4. This illustration shows how to horizontally position the speakers three ways.

(rear view)

Screw

Bracket

Positions

(side view)

❶ Loosen Screw

❷ Rotate Bracket

❸ Tighten Screw

Flat Position	20° Tilt Up	10° Tilt Down
(Bracket Closed)	(Bracket Closed)	(Bracket Open,
		Position #1)

8 ◆ HTS-20 Home-Theater System – Owner’s Manual