Manuals / InFocus / Computer Equipment / Projector

InFocus 330 manual Plug the audio adapter’s other end into the audio cable

Models: 330

1 64

Download 64 pages 14.95 Kb

Page 20

5Plug the audio adapter’s other end into the audio cable.

S e t t i n g

u p

t h e

P r o j e c t o r

	audio	S-video
	adapter
		cable

NOTE: The audio adapter is provided so that the same audio cable used to connect a computer can be used with the adapter to connect a VCR.

CAUTION: Your video player may also have a “Video Out” connector for a coaxial cable connection. DO NOT use this to connect to the projector.

audio cable

FIGURE 7

Connecting the projector to a video player using an S-videocable and the audio cable and adapter

4Plug the audio adapter’s white connector into the left “audio out” connector on your video player. Plug the adapter’s red connector into the right “audio out” connector on the video player (Figure 6 and Figure 7).

5Plug the audio adapter’s other end into the audio cable.

6Plug the audio cable into the “audio in” connector on the projector.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM. It automatically adjusts to optimize its performance for the incoming video. See “Video Standard” on page 23 for details.

10

Image 20

InFocus 330 manual Plug the audio adapter’s other end into the audio cable

Contents

U S E R ’ S G U I D ECopyright 1999 by InFocus Wilsonville, Oregon. All rights reserved Safety Certifications FCC WarningCanada EN 55022 WarningDeclaration of Conformity Australian Certification C-tick mark TrademarksTABLE OF CONTENTS Safety InstructionsSetting up the Projector Using the ProjectorAppendix IndexSpecifications AccessoriesSAFETY INSTRUCTIONS Warning Hot surface. Do not touchOr, send us an e-mail at techsupport@infocus.com I N T R O D U C T I O N Image Resolution INTRODUCTIONCompatibility Unpacking the ProjectorNOTE The contents of your shipping box may vary depending on the projector configuration you’ve orderedShipping box contents I n t r o d u c t i o nUsage Guidelines Side view of projectorWarranty If You Need AssistanceSETTING UP THE PROJECTOR SETTING UP THE PROJECTOR Connector panel S e t t i n gt h e P r o j e c t o rConnecting a Computer Do you want to play your computer’s audio on the projector?If your computer has a PS/2 connector, use the PS/2 mouse cable Connecting a Video Player 5 Plug the audio adapter’s other end into the audio cable Powering up the Projector and Adjusting the Image Turning Off the Projector USING THE PROJECTOR Using the Remote Control USING THE PROJECTORBasic Image Adjustment on underside of remote Remote controldisk mouse right mouse button left mouse button Adjusting the Projector Using the Keypad and Remote Buttons Lamp on/off keypad onlyMenu Source keypad onlyIf you don’t press standby again, the lamp turns off after 15 minutes Using the On-Screen Menus Keypad navigation buttons and drop-down menuDisplay Menu Audio Menu Press the left navigation button to decrease the volumePress the right navigation button to increase the volume Volume adjustments you make are saved for each sourceImage Menu Auto ImageAuto Resize Manual Syncoptions are available only for computer sources. The projector sets these options automatically for video sourcesManual Tracking Horizontal positionStandby Time Controls MenuVideo Standard Default Source Rear ProjectionAuto Source Select Plug and PlayLanguage Menu Display Startup ScreenStatus Menu M A I N T E N A N C E A N D T R O U B L E S H O O T I N G Replacing the Projection Lamp MAINTENANCE & TROUBLESHOOTINGCleaning the Lens 4 Pull the lamp door up and remove it 5 Loosen the two non-removable screws on the outside of the moduleM a i n t e n a n c e T r o u b l e s h o o t i n g6 Lift and grasp the pull tab and lift the module out Figure Replacing the Batteries in the Remote Control Using the Kensington LockTroubleshooting Problem Nothing on projection screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image is out of focus Problem Image and menus are reversed left to rightProblem the projector displays vertical lines, “bleeding” or spots Problem no soundProblem Lamp seems to be getting dimmer Problem Lamp shuts offA P P E N D I APPENDIX Specifications TemperatureDimensions WeightAccessories Standard AccessoriesPower Cords one ships with projector, type depends on country A p p e n d iInFocus Catalog Sales at Optional AccessoriesNOTE You can purchase these items by contacting your dealer or Portable and Laptop Activation Chart Key command to Key command toComputer activate portKey command to Key command toA p p e n d i ComputerKey command to Key command toComputer activate portKey command to Key command toA p p e n d i ComputerUsing Video Mirroring with a PowerBook Computer Projected Image Size Service and Support sectionA p p e n d i Projected image sizeI N D E INDEX I n d e Page Page LIMITED WARRANTY WARRANTY LIMITATION AND EXCLUSIONDISCLAIMER OF UNSTATED WARRANTIES LIMITATION OF LIABILITYPart Number