Manuals / InFocus / Computer Equipment / Projector

InFocus 330 manual Audio Menu, Press the left navigation button to decrease the volume

Models: 330

1 64

Download 64 pages 14.95 Kb

Page 31

Audio Menu

U s i n g	t h e	P r o j e c t o r

Color

The color setting adjusts a video image from black and white to fully saturated color.

•Press the left mouse button to decrease the amount of color in the image.

•Press the right mouse button to increase the amount of color in the image.

Blank Screen

Blank Screen determines what color is displayed when there is no active source and when the projector is in standby. Click the left or right navigation button to toggle between blue and black.

Reset All

Click the left or right navigation button to reset all the options (except Language, Video Standard, Rear Projection, and Standby Time) in all the menus to their original settings.

Audio Menu

			FIGURE 14
			Audio menu
			Volume
			Volume
			• Press the left navigation button to decrease the volume.
	NOTE: Changing the volume		• Press the right navigation button to increase the volume.
	using the menu is the same as		Volume adjustments you make are saved for each source.
	changing it using the keypad.		Volume adjustments you make are saved for each source.
	changing it using the keypad.

20

Image 31

InFocus 330 manual Audio Menu, Press the left navigation button to decrease the volume

Contents

G U I D E U S E R ’ SCopyright 1999 by InFocus Wilsonville, Oregon. All rights reserved EN 55022 Warning Safety CertificationsFCC Warning CanadaAustralian Certification C-tick mark Trademarks Declaration of ConformityUsing the Projector TABLE OF CONTENTSSafety Instructions Setting up the ProjectorAccessories AppendixIndex SpecificationsWarning Hot surface. Do not touch SAFETY INSTRUCTIONSOr, send us an e-mail at techsupport@infocus.com I N T R O D U C T I O N Unpacking the Projector Image ResolutionINTRODUCTION CompatibilityI n t r o d u c t i o n NOTE The contents of your shipping box may vary dependingon the projector configuration you’ve ordered Shipping box contentsSide view of projector Usage GuidelinesIf You Need Assistance WarrantySETTING UP THE PROJECTOR SETTING UP THE PROJECTOR P r o j e c t o r Connector panelS e t t i n g t h eDo you want to play your computer’s audio on the projector? Connecting a ComputerIf your computer has a PS/2 connector, use the PS/2 mouse cable Connecting a Video Player 5 Plug the audio adapter’s other end into the audio cable Powering up the Projector and Adjusting the Image Turning Off the Projector USING THE PROJECTOR Basic Image Adjustment USING THE PROJECTORUsing the Remote Control disk mouse right mouse button left mouse button Remote controlon underside of remote Adjusting the Projector Source keypad only Using the Keypad and Remote ButtonsLamp on/off keypad only MenuIf you don’t press standby again, the lamp turns off after 15 minutes Keypad navigation buttons and drop-down menu Using the On-Screen MenusDisplay Menu Volume adjustments you make are saved for each source Audio MenuPress the left navigation button to decrease the volume Press the right navigation button to increase the volumeManual Sync Image MenuAuto Image Auto ResizeHorizontal position options are available only for computer sources. The projectorsets these options automatically for video sources Manual TrackingVideo Standard Controls MenuStandby Time Plug and Play Default SourceRear Projection Auto Source SelectDisplay Startup Screen Language MenuStatus Menu M A I N T E N A N C E A N D T R O U B L E S H O O T I N G Cleaning the Lens MAINTENANCE & TROUBLESHOOTINGReplacing the Projection Lamp T r o u b l e s h o o t i n g 4 Pull the lamp door up and remove it5 Loosen the two non-removable screws on the outside of the module M a i n t e n a n c e6 Lift and grasp the pull tab and lift the module out Figure Using the Kensington Lock Replacing the Batteries in the Remote ControlProblem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem no sound Problem Image is out of focusProblem Image and menus are reversed left to right Problem the projector displays vertical lines, “bleeding” or spotsProblem Lamp shuts off Problem Lamp seems to be getting dimmerA P P E N D I Weight APPENDIX SpecificationsTemperature DimensionsA p p e n d i AccessoriesStandard Accessories Power Cords one ships with projector, type depends on countryNOTE You can purchase these items by contacting your dealer or Optional AccessoriesInFocus Catalog Sales at Portable and Laptop Activation Chart activate port Key command toKey command to ComputerComputer Key command toKey command to A p p e n d iactivate port Key command toKey command to ComputerComputer Key command toKey command to A p p e n d iUsing Video Mirroring with a PowerBook Computer Projected image size Projected Image SizeService and Support section A p p e n d iI N D E INDEX I n d e Page Page LIMITATION OF LIABILITY LIMITED WARRANTYWARRANTY LIMITATION AND EXCLUSION DISCLAIMER OF UNSTATED WARRANTIESPart Number