Displaying a video image
Remove the lens cap. | remove lens cap |
|
| Press the Power button on the top of the projector. | press Power | ||
| The projector chimes if the chime feature is enabled (page 28). The LED |
|
|
|
| flashes green and the fans start to run. When the lamp comes on, the startup |
|
|
|
| screen displays and the LED is steady green. It can take a minute for the |
|
|
|
| image to achieve full brightness. |
|
|
|
| ? No startup screen? Get help on page 12. |
|
|
|
|
|
|
|
|
| Plug in and turn on the video device. | turn on video device | ||
| An image from the video device should appear on the projection screen. If it | |||
|
|
|
| |
| doesn’t, press the Source button on the keypad. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjust the height of the projector by pressing the release button to extend | adjust height |
the elevator foot. Rotate the leveling foot, if necessary. |
|
| elevator |
| foot |
rotate leveling foot
Position the projector the desired distance from the screen at a 90 degree
angle to the screen. See page 33 for a table listing screen projected image sizes and distances to the screen.
adjust distance
8
