InFocus IN70 SERIES manual Use Scart to Rgbs Cable RGB with sync

Connect to: SCART Source

Use: SCART to RGBS Cable (RGB with sync)

1 Connect 4 color-coded connectors to corresponding connectors on projector.

2 Enable SCART RGB in the Source

Enable menu (Settings > Sources >

Source Enable).

Connect to: DVI Source

Use: M1 to DVI Cable 100% digital connection.

Connect the cable to the projector’s M1-DA/DVI connector.

www.infocus.com/store part no. SP-DVI-D

4 Turn on projector and source

1Connect the power cord to the projector

and to an electrical outlet

The green light on the projector near the power button will turn on.

2Turn on the projector

Press power (on the projector or remote). The green light on the projector will start blinking.

3Wait for the lamp to warm up

After a few seconds, the green light will stop blinking and stay on. It can take a minute for the lamp to reach full brightness.

5-10 sec.

Warning: Do not look directly into the lens when the projector is turned on.

4Turn on the source device

Turn on your DVD player, cable box, VCR, game, or HDTV receiver.

5Select the video source

If needed, press source (on the projector or remote) to view the source. You may have to press it more than once.